---

Manual Reference Pages  - BGPQ3 (8)

---

bgpq3 - bgp filtering automation for cisco and juniper routers

CONTENTS

Synopsis
Description
Examples
Diagnostics
See Also
Author

bgpq3 [-h host] [-S sources] [-EP] [ -f asn | -G asn ] [-36A] [-R len] OBJECTS [...]

The bgpq3 ultility used to generate Cisco and Juniper prefix-lists, extended access-lists, policy-statement terms and as-path lists based on RADB data.

The options are as follows:

-3	assume that your device is asn32-safe.
-6	generate IPv6 prefix/access-lists (IPv4 by default).
-A	try to aggregate prefix-lists as much as possible (Cisco only).
-d	enable some debugging output.
-E	generate extended access-list (Cisco) or policy-statement term using route-filters (Juniper).
-f number
	generate input as-path access-list.
-G number
	generate output as-path access-list.
-h host
	host running IRRD database (default: whois.radb.net)
-J	generate config for Juniper (Cisco by default).
-M match
	extra match conditions for Juniper route-filters.
-l name
	name of generated entry.
-P	generate prefix-list (default, backward compatibility).
-R len	allow specific routes up to specified masklen too.
-S sources
	use specified sources only (default: RADB,RIPE,APNIC).
-T	disable pipelining.
OBJECTS
	means networks (in prefix format), autonomous systems and as-macros.

Generating named juniper prefix-filter for AS20597:

~>bgpq3 -Jl eltel AS20597
policy-options {
replace:
 prefix-list eltel {
    81.9.0.0/20;
    81.9.32.0/20;
    81.9.96.0/20;
    81.222.128.0/20;
    81.222.192.0/18;
    85.249.8.0/21;
    85.249.224.0/19;
    89.112.0.0/19;
    89.112.4.0/22;
    89.112.32.0/19;
    89.112.64.0/19;
    217.170.64.0/20;
    217.170.80.0/20;
 }
}

For Cisco we can use aggregation (-A) flag to make this prefix-filter more compact:

~>bgpq3 -Al eltel AS20597
no ip prefix-list eltel
ip prefix-list eltel permit 81.9.0.0/20
ip prefix-list eltel permit 81.9.32.0/20
ip prefix-list eltel permit 81.9.96.0/20
ip prefix-list eltel permit 81.222.128.0/20
ip prefix-list eltel permit 81.222.192.0/18
ip prefix-list eltel permit 85.249.8.0/21
ip prefix-list eltel permit 85.249.224.0/19
ip prefix-list eltel permit 89.112.0.0/18 ge 19 le 19
ip prefix-list eltel permit 89.112.4.0/22
ip prefix-list eltel permit 89.112.64.0/19
ip prefix-list eltel permit 217.170.64.0/19 ge 20 le 20

- you see, prefixes 89.112.32.0/19 and 89.112.64.0/19 now aggregated into single entry 89.112.0.0/18 ge 19 le 19.

Well, for Juniper we can generate even more interesting policy-options, using -M <extra match conditions>, -R <len> and hierarchical names:

~>bgpq3 -AJEl eltel/specifics -R 32 -M "community blackhole" AS20597
policy-options {
 policy-statement eltel {
  term specifics {
replace:
   from {
    community blackhole;
    route-filter 81.9.0.0/20 upto /32;
    route-filter 81.9.32.0/20 upto /32;
    route-filter 81.9.96.0/20 upto /32;
    route-filter 81.222.128.0/20 upto /32;
    route-filter 81.222.192.0/18 upto /32;
    route-filter 85.249.8.0/21 upto /32;
    route-filter 85.249.224.0/19 upto /32;
    route-filter 89.112.0.0/18 prefix-length-range /19-/32;
    route-filter 89.112.64.0/19 upto /32;
    route-filter 217.170.64.0/19 prefix-length-range /20-/32;
   }
  }
 }
}

generated policy-option term now allows all specifics for eltel networks if they match with special community ’blackhole’.

Of course, this version supports IPv6 (-6):

~>bgpq3 -6l as-retn-6 AS-RETN6
no ipv6 prefix-list as-retn-6
ipv6 prefix-list as-retn-6 permit 2001:7fb:fe00::/48
ipv6 prefix-list as-retn-6 permit 2001:7fb:fe01::/48
[....]

and initial support for ASN 32 is also here (however, now only for Juniper JunOS 9.1+ - Cisco IOS is not (as of yet) supports it):

~>bgpq3 -J3f 112 AS-SPACENET
policy-options {
replace:
 as-path-group NN {
  as-path a0 "^112(112)*$";
  as-path a1 "^112(.)*(1898|5539|8495|8763|8878|12136|12931|15909)$";
  as-path a2 "^112(.)*(21358|23456|23600|24151|25152|31529|34127|34906)$";
  as-path a3 "^112(.)*(35052|41720|43628|44450|196611)$";
 }
}

see AS196611 in the end of the list ? That’s AS3.3 in ’asplain’ notation.

For Cisco and old versions of JunOS you should not use switch -3, and the result will be next:

~>bgpq3 -f 112 AS-SPACENET
no ip as-path access-list NN
ip as-path access-list NN permit ^112(_112)*$
ip as-path access-list NN permit ^112(_[0-9]+)*_(1898|5539|8495|8763)$
ip as-path access-list NN permit ^112(_[0-9]+)*_(8878|12136|12931|15909)$
ip as-path access-list NN permit ^112(_[0-9]+)*_(21358|23456|23600|24151)$
ip as-path access-list NN permit ^112(_[0-9]+)*_(25152|31529|34127|34906)$
ip as-path access-list NN permit ^112(_[0-9]+)*_(35052|41720|43628|44450)$

AS196611 is no more in the list, however, AS23456 (transition AS) would be added to list if it were not present.

When everyting is ok, bgpq3 generates access-list to standard output and exits with status == 0. In case of errors they are printed to stderr and program exits with non-zero status.

http://www.radb.net/ Routing Arbiter project http://www.ietf.org/internet-drafts/ draft-michaelson-4byte-as-representation-05.txt for information on ’asdot’ and ’asplain’ notations.

.An Alexandre Snarskii Aq snar@snar.spb.ru